How to Know When Car Brakes Need Work

It would be a perfect world if our cars and trucks never required routine maintenance and upkeep, but unfortunately that is not reality. Our vehicles require a specific level of care to preserve and sustain appearance, performance, and most importantly, safety. Routine maintenance such as windshield wiper blade replacement, radiator flushes, tire rotations, oil changes, tune-ups, and more, are critical to overall vehicle preservation.

Pay Special Attention to the Brakes

One of the most important components to keep in a safe and functional condition is the braking system. This system requires special attention in order to keep you safe on the road and protect your investment. If you neglect your car brakes, not only can it cause extra damage to your vehicle, it can lead to your car being a total loss. That is because, in many cases, when an entire braking system needs replaced, the cost can exceed the total value of the vehicle. In this situation, a person’s best bet is to sell their totaled car to a junk car buyer, purchase another vehicle, and then stay dedicated to a routine brake maintenance agenda to avoid vehicular damage.

As soon as you start to notice signs of brake problems, bring your car into a professional automotive body shop for an inspection before the problem can cause overall car damage. Don’t know the signs that suggest your car brakes need some work? Continue reading to learn the most common ones to keep an eye out for while you drive!

Repair or Replacement?

To understand how to identify or look out for brake problems in your vehicle, first it is helpful to understand the basic components of a car brake system. There are four general parts: the hydraulic clamp, brake fluid line, brake pads, and brake rotors. Some may argue that brake pads and rotors are actually part of the wheel, but in this case, we will still include them because they can influence the need for brake repair. In most cases, the brake lines and hydraulic clamp will not experience much wear and tear; they are built to last a long time. On the other hand, brake pads and rotors are susceptible to wear and tear at all times and will need replacing every few thousand miles or so.

They are exposed to deterioration every time you drive because the pad presses against the smooth metal rotor every time the brake is applied. Over time, this pad is worn down and will make a recognizable noise to warn you that they are low. Brake pads squeal or hiss when they get low. The noise is actually the result of the bare pad scraping against the metal rotor (the metal disk that spins on the wheel) and causing friction between them. It can start out as a faint squeak, and turn into a high-pitched squeal if neglected. If you hear grinding then the pad is most likely worn completely thin and is grinding against the rotor. This can really damage the brake rotors. The thickness of the brake padding, the amount of driving you do, and the way you drive all influence the amount of times you will need to replace them.

Selling a Junk Car for Cash

If you discover that your car brakes are shot and need to be replaced, but the cost exceeds the total value if your vehicle, you can still make it profitable by selling it to a junk car buyer. Choose a company that has premium electronic scales that can accurately assess the value of your junk car. Then use the cash toward another vehicle!

How to Clean a Car Battery

So much happens to a car in its lifetime. There will be instances where the best component will become worn or dirty because of years of driving. There could be instances where the oil got dirty and was only cleaned or purged weeks later. The battery of your car can be cleaned at a workshop or in your own home.

Before starting the job, the obvious needs to be stated – make sure that the car is turned off unless you are a fan of getting burned with extremely hot electricity. You could also short the circuits which could damage the electronics of your car.

You will need to determine the configuration of the terminals as there are different types. Determining the configuration will help you to pick the correct wrench to loosen the nuts that keep the cables in place.
Now, you need to unfasten the cables (negative and positive respectively) from their posts. Twisting might be necessary to release the cable as they might have been put on quite tightly.
Before continuing with the process, checking for leaks and cracks is a must. Car batteries lose acid and could corrode the rest of the components of the engine. If you do see any cracks or leaks, the battery must be replaced.
Cables and clamps could also have cracks along the wiring. They could easily be replaced with new parts.
This is the part where a basic household item is required to clean the battery: baking soda. The ratio to mix baking soda and hot water in a small container is 1:17. This is usually a tablespoon of baking soda and a cup of hot water.
Then it is time for the scrubbing and cleaning. A toothbrush would be ideal for this process so that your hands don’t come into contact with the battery.
Dip the toothbrush into the baking soda and hot water mixture, and scrub away at the corrosion build up. Usually the clamps and cable posts contain the most build up and will need the maximum amount of cleaning.
Once all the corrosion is off, it is an absolute necessity to rinse away any baking soda and loose corrosion with cool water.
The battery has to be completely dry before replacing the cables and clamps to avoid short circuiting the system.

Tips for Windshield Glass Repair

If you are reading this article, chances are your car glass or the windshield is broken. It may not be your fault. Sometimes, things go out of control no matter how hard we try to keep them under control. Your car windshield may shatter because of a walnut that fell from the tree, for instance. Getting an auto glass repaired is a must, and below are some tips to help you out. Read on to know the tips.

Go to an auto glass shop

The crack can be small or large, but making delays is not a good idea. The crack will keep spreading into several fissures. In the end, the glass will just shatter. You may get seriously injured if the glass shatters while you are on your way in your car.

So, as soon as you notice a tiny crack, find a good auto shop for a repair or replacement. Waiting for a few days or weeks may put your life at risk.

Check the crack

While you can wait for a day or two to find a good shop, don’t just sit idle. Instead, take a closer look at the crack to see how bad it is. If the crack is really small, you are not at risk and you can drive for a day or two carefully. But if the crack is rather big, you may want to head to the nearest shop to get it fixed as soon as possible.

Temporary solutions

You can opt for a temporary solution, but it may not work for more than a day or two. For instance, you can give a go to on auto glass repair kit. In case of a minimal damage, such as a small chip, you can count on a kit for a few days.

However, in the end, you will still need to take your car to a professional for repair. Now, if your car auto glass has a big crack, we suggest that you avoiding using an at-home kit. Things can go wrong. Further damage to the glass may result in the collapse of the roof of the car.


If you want to prevent cracks down the road, we suggest that you examine your auto glass on a regular basis. This way you can identify the problems before they get worse, which will help you avoid the risk and save money.

Aside from this, using regular sponges in order to clean the windshield is not recommended. Instead, what you need to do is buy a microfiber cloth to avoid scratches. Frequent cleaning of the windshield wipers is also a good habit. However, using low quality products is not good, as it will cost you a lot down the road. Also, the windshield should be of high quality.

Long story short, if you have a damaged auto glass, we suggest that you look for a good professional for repair services. This is a must if you want to be on the safe side.